Research Resources Services Special Collections General Information Library Home

Systems FAQ

1. Press SYSTEM button on the remote control.
2. Press the round directional button on its right edge to move the menus that appear to the right. Stop at the menu titled "AUTO IMAGE". The icon shows three vertical wavy lines.
3. Press the round directional button on its bottom edge to move the red indicator down to the GO button located on this menu.
4. Press the button that is located on the underside of the remote.
These steps will activate the "AUTO IMAGE" feature of the projector and will readjust the image. The process may take about 30-60 seconds. While the image is being adjusted, the message "Wait a moment!" will be displayed.
5. After the "Wait a moment!" message disappears, use the round directional button to move the red indicator to the Quit item on this menu.
6. Press the MENU button on the remote control.

This document is maintained by: the CSUS Library(wwwlibrary@wwwlibrary.csustan.edu)
Page created: 8/10/01
Page updated: 01/04/02